Titanium Grade 2 Discs and Cut Rounds in Chennai for Chemical and Pharma Jobs

Titanium Grade 2 Discs and Cut Rounds in Chennai for Chemical and Pharma Jobs

Titanium Grade 2 discs, circles and cut rounds for Chennai chemical and pharma fabricators. Thin circles are punched in-house from about 30 mm to 300 mm; thicker or larger rounds are cut from plate or bar to the diameter and thickness on your drawing, with the heat number marked on each piece. This page is for round blanks, including heavy cut rounds — not for rectangular sheet and plate, which are covered on Titanium Grade 2 sheet in Chennai. Ganesh Metals has been a high-nickel alloy and titanium stockist, supplier and processor in Mumbai since 1992.

We provide direct door delivery to your company in Chennai. Discs and cut rounds are prepared at our Mumbai shop and supplied from our Mumbai stock to Alathur, Manali, Ambattur, Sriperumbudur or Guindy. Send the diameter, thickness and quantity, and we will confirm whether we punch the circle or cut it from plate or bar.

Titanium Grade 2 discs: grade and specification

Discs, circles and cut rounds are produced from Titanium Grade 2 (UNS R50400) to ASTM B265 for plate and sheet and ASTM B348 for bar. The MTC follows the parent product.

Thin discs come from sheet; heavier rounds come from plate or bar, which is how we handle thicknesses that cannot be punched. For rectangular sheet and plate sizes, see the Grade 2 sheet in Chennai page.

Punching range: in-house punched circles from about 30 mm to 300 mm. Diameters or thicknesses outside that range are cut from stock plate or bar to your drawing, with the heat number marked on each piece.

Pipe, tube and flanges: sizes confirmed per enquiry, from Mumbai stock.

Equivalents: W.Nr 3.7035. Grade 2 is the general-purpose commercially pure grade used for most chemical and pharma discs. Grade 1, 7 or 12 can be quoted on enquiry if the drawing names them.

Typical chemistry of the parent metal: Fe 0.30% max, O 0.25% max, C 0.08% max, N 0.03% max, H 0.015% max, titanium balance. Density about 4.51 g/cm³. Strength values are those of the parent plate or bar, reported on the 3.1 MTC.

Fabrication note: titanium discs that will be welded need full inert-gas shielding, and should be kept off iron-contaminated benches. We cut and pack titanium separately from nickel alloys and iron-bearing material.

Related pages: Titanium Grade 2 sheet in Chennai · Titanium Grade 2 grade data · Titanium sheet & plate · Titanium round bar · Titanium in Chennai · Metal weight calculator

Grade 2 discs: punched circles and thick cut rounds

Pharma and chemical jobs often arrive as a diameter and a thickness, not as a sheet size. We punch thin Grade 2 circles from about 30 mm to 300 mm, and we cut thicker or larger rounds from stock plate or bar to your drawing. Each piece keeps its heat number. Titanium is light; the metal weight calculator helps you estimate the weight before you enquire.

How to order Grade 2 discs for Chennai

1. Call +91 22 6636 2372, WhatsApp +91 99872 73700 or email sales@ganeshmetals.com with the grade (Grade 2), disc or cut-round diameters, thickness, quantity, and whether the pieces will be punched or must be cut from plate or bar. You can also use our enquiry form.

2. We confirm stock and send price, availability and the MTC heat number.

3. You confirm the order and the transporter. We cut, mark, pack, dispatch and share the documents.

Where Grade 2 discs are used in Chennai

Pharma and bulk-drug fabricators around Alathur and Sriperumbudur: Grade 2 discs for manway covers, vessel blanks and clean-process pads.

Chemical units in Manali: cut rounds for nozzle pads, covers and chloride-service blanks.

Exchanger shops in Ambattur: punched Grade 2 circles for baffles and small tube-sheet inserts on seawater or brine duty.

Condenser and reactor cover work: thicker discs cut from plate where a punched sheet circle would be too thin.

Machine shops in Guindy: heavy Grade 2 rounds cut from plate or bar, ready for turning to a finished boss or blank.

Why Chennai chemical and pharma shops order Grade 2 discs from Ganesh Metals

High-nickel alloy stockist, supplier and processor in Mumbai since 1992.

The mill's original EN 10204 3.1 test certificate is passed on with every supply, with heat-number traceability.

ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certified.

Thick rounds are cut from plate or bar on enquiry, not only from thin punched sheet.

Grade 1, 2 and 7 look identical, so the grade on every lot is confirmed against the MTC before dispatch.

Titanium is cut and packed separately from nickel alloys and iron-bearing material.

FAQs — Chennai

Do you supply Titanium Grade 2 discs to Chennai chemical and pharma shops?

Yes. We send Grade 2 discs, circles and cut rounds to Alathur, Manali, Ambattur, Sriperumbudur and Guindy, supplied from our Mumbai stock. We provide direct door delivery to your company in Chennai.

How long does delivery to Chennai take?

That depends on the transporter and route. We confirm the dispatch plan with you when the order is placed.

Can you cut a thick Grade 2 disc from plate or bar?

Yes. Send the diameter, thickness and quantity. We check stock plate and bar and cut the round to suit, with the heat number marked. Thin circles in the 30–300 mm range can be punched from sheet.

Should I order discs here or Grade 2 sheet?

Order discs, circles and cut rounds on this page. For rectangular sheet and plate, use Titanium Grade 2 sheet in Chennai. If your list mixes both, send the full list and we will quote them together.

Will titanium discs come with a 3.1 certificate?

Yes. Every supply comes with the mill's original EN 10204 3.1 test certificate, and heat numbers are marked on each piece. Call +91 22 6636 2372 or WhatsApp +91 99872 73700 to discuss your use.