Titanium Grade 2 Sheet and Plate in Chennai for Desalination and Chemical Work

Titanium Grade 2 Sheet and Plate in Chennai for Desalination and Chemical Work

Titanium Grade 2 sheet and plate for Chennai fabricators working on chloride and seawater duty. Grade 2 is commercially pure titanium: light, easy to form, and almost untouched by seawater, brine and many chloride solutions. Desalination equipment builders on the coastal belts towards Minjur and Nemmeli, chemical units in Manali and pharma plants around Alathur and Sriperumbudur use it for exchanger plates, tube sheets, linings and vessel parts. Ganesh Metals supplies Grade 2 sheet and plate cut to size and has been a high-nickel alloy and titanium stockist, supplier and processor in Mumbai since 1992.

We provide direct door delivery to your company in Chennai. Titanium is cut and packed at our Mumbai shop and supplied from our Mumbai stock to Minjur, Ennore, Manali, Ambattur, Alathur, Sriperumbudur or Nemmeli. Tell us the medium and temperature with your sizes, and we will confirm Grade 2 suits the job.

Titanium Grade 2 sheet and plate specifications

Titanium Grade 2 (UNS R50400): plate, sheet and strip ASTM B265 / ASME SB265, bar ASTM B348, seamless and welded tube ASTM B338, seamless pipe ASTM B861, welded pipe ASTM B862.

Equivalents: W.Nr 3.7035. Grade 2 is the general-purpose commercially pure grade; Grade 1 is softer for deep forming, and Grades 7 and 12 are used for hot reducing acids and crevice-prone duty. See all titanium grades.

Pipe, tube and flanges: sizes confirmed per enquiry, from Mumbai stock.

Fabrication note: titanium is welded under full inert-gas shielding on both sides of the joint, or the weld picks up oxygen and turns brittle. Keep titanium away from iron contamination on the shop floor; cut and grind it with dedicated tools.

Typical chemistry: Fe 0.30% max, O 0.25% max, C 0.08% max, N 0.03% max, H 0.015% max, titanium balance. Density about 4.51 g/cm³, a little over half the weight of nickel alloys.

Minimum properties, ASTM B265 Grade 2: tensile 345 MPa, yield 275 MPa, elongation 20%.

Thickness and finish: thin cold-rolled sheet for plate exchangers and linings, thicker hot-rolled plate for tube sheets and covers. Tell us the finish your drawing calls for.

Related pages: Titanium Grade 2 grade data · Titanium sheet & plate · Titanium round bar · Titanium pipe & tube · All titanium grades · Titanium in Chennai · Monel 400 sheet in Chennai

Grade 2 sheet, plate and circles

Exchanger and desalination builders buy thin Grade 2 sheet for plates and liners and thicker plate for tube sheets and flanged covers. We cut sheet and plate to size, punch circles in-house from about 30 mm to 300 mm, and cut thicker or larger circles from plate or bar to your drawing. Each piece keeps its heat number. The metal weight calculator helps you estimate weight; titanium weighs much less than nickel alloys for the same size.

How to order Titanium Grade 2 sheet for Chennai

1. Call +91 22 6636 2372, WhatsApp +91 99872 73700 or email sales@ganeshmetals.com with the grade (Grade 2, or Grade 1, 7 or 12 where needed), form, sheet or plate thickness, cut sizes or circle diameters, quantity and the ASTM or ASME specification. You can also use our enquiry form.

2. We confirm stock and send price, availability and the MTC heat number.

3. You confirm the order and the transporter. We cut, mark, pack, dispatch and share the documents.

Where Grade 2 sheet and plate are used around Chennai

Desalination equipment fabricators on the Minjur and Nemmeli side: Grade 2 sheet and plate for brine heaters, exchanger plates, tube sheets and seawater-wetted parts.

Chemical and chlor-alkali units in Manali: Grade 2 for wet-chlorine coolers, hypochlorite equipment and anode-related parts.

Pharma and bulk-drug plants around Alathur and Sriperumbudur: Grade 2 plate for reactor parts, condenser tube sheets and linings in chloride service.

Plate heat-exchanger and process-skid builders in Ambattur: Grade 2 sheet for plates and frames running on seawater or brackish cooling water.

Coastal cooling-water systems around Ennore: Grade 2 plate for condenser tube sheets and water-box linings.

Why Chennai fabricators order titanium sheet from Ganesh Metals

High-nickel alloy stockist, supplier and processor in Mumbai since 1992.

The mill's original EN 10204 3.1 test certificate is passed on with every supply, with heat-number traceability.

ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certified.

Grade 1, 2 and 7 look identical, so the grade on every lot is confirmed against the MTC before dispatch.

Thick circles and discs can be cut from plate or bar on enquiry, not only thin punched sheet.

Titanium is cut and packed separately from nickel alloys and iron-bearing material.

FAQs — Chennai

Do you supply Titanium Grade 2 sheet to Chennai?

Yes. We send Grade 2 sheet, plate and cut circles to Minjur, Ennore, Manali, Ambattur, Alathur, Sriperumbudur and Nemmeli, supplied from our Mumbai stock. We provide direct door delivery to your company in Chennai.

How long does delivery to Chennai take?

That depends on the transporter and route. We confirm the dispatch plan with you when the order is placed.

Titanium Grade 2 or Monel 400 for seawater equipment?

Grade 2 resists both flowing and stagnant seawater and is far lighter. Monel 400 is easier to weld in a general shop and suits flowing seawater well. Share the conditions and we will help you compare.

Can you supply a thick Grade 2 disc, cut from plate or bar?

Yes. Send the diameter, thickness and quantity. We check stock plate and bar for the size and cut the disc to suit, with the heat number marked.

Will titanium sheet come with a 3.1 certificate?

Yes. Every supply comes with the mill's original EN 10204 3.1 test certificate, and heat numbers are marked on each piece. Call +91 22 6636 2372 or WhatsApp +91 99872 73700 to discuss your use.