Titanium Round Bars & Rods – Grade 2 to ASTM B348

Titanium Round Bar (Grade 2, ASTM B348) – Stockist, Supplier and Processor in Mumbai Since 1992

Titanium round bar is machined into fasteners, shafts, fittings and valve parts for seawater and chemical service. As a stockist, supplier and processor in Mumbai since 1992, Ganesh Metals supplies titanium Grade 2 (UNS R50400, W.Nr 3.7035) round bar and rod to ASTM B348 / ASME SB348, and forgings to ASTM B381, with other grades quoted on enquiry. Bars can be supplied in random lengths or cut to your lengths, and each piece is marked with its heat number and covered by an EN 10204 3.1 mill test certificate. Stock, mill origin and certification are confirmed for every enquiry before quoting.

For titanium bar, tell us the grade, diameter, length, tolerance and specification, and whether the bar is for machining fasteners, shafts or fittings. Grade 2 suits most corrosion-led parts; where higher strength is needed, other grades may be quoted after availability is confirmed. We will advise on the most practical option.

Why Choose Titanium Bar?

Titanium bar combines a low density with good strength and outstanding resistance to seawater and chloride corrosion. Machined titanium parts resist galling poorly, so thread design and lubrication matter, but they last for years in conditions that destroy steel fasteners.

Applications:

Titanium round bars become fasteners, shafts and fittings that must survive seawater and oxidising chemicals.

Marine: Seawater-wetted fasteners, pump shafts and fittings on ships and offshore platforms.
Chemical Processing: Bolting, agitator parts and valve components for chlorine and oxidising service.
Heat Exchangers: Tie rods, studs and fasteners for titanium-tubed condensers and coolers in plants.
Pharma Equipment: Machined fittings and shafts exposed to chloride-bearing and oxidising reagents.
Aerospace: Lightweight machined fittings, pins and brackets made from Grade 2 titanium bar.

Titanium is supplied as round bars and rods, discs cut from bar, bars cut to length and other forms on request. Sizes on request – send diameter, length, grade and quantity.

Titanium Bar: Specs, Sizes & Equivalents

Titanium bar cut from longer lengths is stamped or tagged with the original heat number, and the cutting record ties each piece to the MTC. Quoted availability is valid for 2 days and is reconfirmed before the order is booked, so your production plan rests on confirmed stock.

Titanium Bar: ASTM / ASME Specifications by Form

Bar & Rod: ASTM B348 / ASME SB348 (Grade 2)
Grade 2 (UNS R50400) as standard; other B348 grades are quoted on enquiry after stock is confirmed.
Forgings: ASTM B381 (F-2) on request. Other forms on request. Cut lengths and discs from bar on request.

Typical Titanium Bar Chemistry & Properties

Typical Gr 2 bar: O ≤ 0.25%, Fe ≤ 0.30%
Typical minimums (ASTM B348 Gr 2): tensile 345 MPa, yield 275 MPa, elongation 20%; density about 4.51 g/cm³.
Typical: titanium threads can gall, so anti-seize compounds are used in assembly.

FAQ: Can titanium round bar be cut to length?

Yes – bars are cut to your exact lengths.
Q: Which spec covers titanium round bar? A: ASTM B348 / ASME SB348, supplied with an EN 10204 3.1 mill test certificate.
Q: Do you supply titanium bar in grades other than Grade 2? A: On enquiry only, after we confirm stock and certification.

Titanium Bar Equivalent Grades & FAQ

Equivalents: 3.7035 · CP Ti Gr 2 · R50400 bar
Q: Can you supply titanium discs cut from bar? A: Yes, discs cut from bar are supplied on request.
Enquire for Titanium Bar: call +91 99872 73700 or email sales@ganeshmetals.com with form, size and quantity.

Certified Titanium Bar Supply

Every Titanium Bar order from Ganesh Metals ships with full documentation:

ISO 9001/14001/45001
MTC to EN 10204 3.1 with heat-number traceability
ASTM B348 / B381 compliance

Titanium Bar Forms We Supply

Round Bars
Rods & Bar Stock
Other Forms (request)
Pieces
Forgings & Discs
Bars Cut to Length

Why Ganesh Metals?

Stockist, supplier and processor in Mumbai since 1992
PMI-verified Titanium Bar with original mill markings
Sizes on request – send Titanium Bar form, size & quantity for a quote

GANESH METALS

NICKEL ALLOYS
➤ Inconel 600
➤ Inconel 601
➤ Inconel 625
➤ Inconel 690
➤ Inconel 718
➤ Inconel X-750
➤ Hastelloy C22
➤ Hastelloy C276
➤ Hastelloy B2
➤ Hastelloy B3
➤ Hastelloy C4

OTHER GRADES
➤ Monel 400
➤ Monel K500
➤ Monel R405
➤ Incoloy 800
➤ Incoloy 800H / 800HT
➤ Incoloy 825
➤ Incoloy 925
➤ Alloy 20
➤ Nickel 200 / 201
➤ Nimonic 80

GET IN TOUCH
Mahendra Prajapati
📍 Shop Number 12, Sant Sena Maharaj Marg,
2nd Kumbharwada, Mumbai – 400004
📞 +91 99872 73700
📧 sales@ganeshmetals.com
📧 ganeshmetal2372@gmail.com