Titanium Supplier in Hyderabad: Grade 2 for Pharma Condensers and Grade 5 for Aerospace Parts

Titanium Supplier in Hyderabad: Grade 2 for Pharma Condensers and Grade 5 for Aerospace Parts

Hyderabad uses titanium in two very different ways. Bulk-drug plants in Jeedimetla, IDA Bollaram, Patancheru, Pashamylaram and Genome Valley use Grade 2 tube and plate for condensers and reactor parts that face chlorides, hypochlorite and wet chlorine. Aerospace and defence suppliers in Adibatla and Balanagar machine Grade 5 (Ti-6Al-4V) bar for light, strong parts. Ganesh Metals supplies both from Mumbai as plate, sheet, strip, circles, round bar, pipe and tube. We have been a high-nickel alloy and titanium stockist, supplier and processor since 1992.

We provide direct door delivery to your company in Hyderabad. Titanium is cut and packed at our Mumbai shop and sent to Jeedimetla, IDA Bollaram, Patancheru, Pashamylaram, Genome Valley, Adibatla, Balanagar or Cherlapally after we agree the dispatch plan. Tell us the process media and temperature, or the drawing specification for machined parts, and we will match the grade.

Titanium grades and specifications

Titanium Grade 2 (UNS R50400): plate, sheet and strip ASTM B265 / ASME SB265, bar ASTM B348, seamless and welded tube ASTM B338, seamless pipe ASTM B861, welded pipe ASTM B862.

Titanium Grade 5 (Ti-6Al-4V, UNS R56400): bar ASTM B348 and plate ASTM B265, plus forgings ASTM B381. Grade 23 (Ti-6Al-4V ELI, UNS R56407) is quoted on enquiry for medical and fracture-critical parts.

Titanium Grade 1 (UNS R50250) for deep forming, Grade 7 (UNS R52400, with palladium) and Grade 12 (UNS R53400) for hot reducing acid and crevice-prone chloride duty. Fittings ASTM B363, flanges and forgings ASTM B381.

Equivalents: Grade 2 W.Nr 3.7035; Grade 5 W.Nr 3.7165. Aerospace drawings may call for AMS specifications; tell us which one and we will confirm availability before quoting.

Fabrication note: titanium must be welded under full inert-gas shielding, front and back, or the weld picks up oxygen and turns brittle. Grade 2 forms and rolls easily into shells and tube sheets, while Grade 5 is mainly machined from bar.

Typical chemistry: Grade 2 is commercially pure titanium with Fe 0.30% max and O 0.25% max. Grade 5 has Al 5.5–6.75% and V 3.5–4.5%. Density: Grade 2 about 4.51 g/cm³, Grade 5 about 4.43 g/cm³, a little over half the weight of nickel alloys.

Minimum properties (ASTM B265 / B348): Grade 2 tensile 345 MPa, yield 275 MPa, elongation 20%. Grade 5 annealed tensile 895 MPa, yield 828 MPa, elongation 10%.

Full grade details: Titanium & titanium alloys · Titanium Grade 2 · Titanium sheet & plate · Titanium pipe & tube · Titanium round bar · Hastelloy in Hyderabad · Nickel 200/201 in Hyderabad

Titanium forms we supply

Pharma plants and their equipment builders mostly buy Grade 2 seamless and welded tube for condenser and exchanger bundles, plus plate and circles for tube sheets, dished ends and lining patches. Aerospace and defence machine shops buy Grade 5 round bar cut to blank lengths. We also supply sheet, strip, pipe, flanges and fittings, and every piece keeps its heat number. Sizes are on request. The metal weight calculator helps you estimate weight.

How to order titanium for Hyderabad

1. Call +91 22 6636 2372, WhatsApp +91 99872 73700 or email sales@ganeshmetals.com with the grade (Grade 1, 2, 5, 7 or 12), form, thickness, diameter or tube OD and wall, lengths, quantity and the ASTM, ASME or AMS specification on your order.

2. We confirm stock and send price, availability and the MTC heat number.

3. You confirm the order and the transporter. We cut, mark, pack, dispatch and share the documents.

Where titanium is used in Hyderabad

Bulk-drug plants in Jeedimetla, IDA Bollaram and Patancheru: Grade 2 tube and plate for condensers, coolers and vent lines that see chlorides and wet chlorine.

API and intermediate units in Pashamylaram and Genome Valley: Grade 2 and Grade 7 for reactor parts, agitator shafts and dip pipes in hypochlorite and oxidising acid duty.

Aerospace component makers in the Adibatla aerospace park: Grade 5 bar for brackets, fittings and fasteners where weight matters.

Defence and precision engineering shops in Balanagar and Kukatpally: Grade 5 and Grade 2 bar for housings, shafts and parts that must not corrode.

Heat-exchanger and process-equipment fabricators in Cherlapally and IDA Uppal: Grade 2 tube and tube sheets for exchangers on brackish or chloride cooling water.

Why Hyderabad buyers choose Ganesh Metals for titanium

High-nickel alloy stockist, supplier and processor in Mumbai since 1992.

The mill's original EN 10204 3.1 test certificate is passed on with every supply, with heat-number traceability.

ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certified.

Grade 2 and Grade 5 look alike, so the grade on every lot is confirmed against the MTC before dispatch.

Tube is supplied cut to bundle length, and plate is cut to tube-sheet and lining sizes, so less scrap stays at your works.

Grade 5 bar is cut to blank lengths with the heat number marked on every blank.

FAQs — Hyderabad

Do you supply titanium to Hyderabad?

Yes. We send titanium Grade 1, 2, 5, 7 and 12 plate, sheet, tube, pipe and bar to Jeedimetla, IDA Bollaram, Patancheru, Pashamylaram, Genome Valley, Adibatla and Balanagar from our Mumbai stock. We provide direct door delivery to your company in Hyderabad.

How long does delivery to Hyderabad take?

That depends on the transporter and route. We confirm the dispatch plan with you when the order is placed.

Titanium Grade 2 or Hastelloy C276 for a pharma condenser?

Grade 2 titanium is excellent with chlorides, hypochlorite and wet chlorine, and it is light. It is not suited to hydrofluoric acid or hot reducing acids such as strong hydrochloric acid, where Hastelloy C276 is usually chosen. Send your process media and temperature and we will help you compare.

Can you supply Grade 5 bar to an AMS specification for an Adibatla aerospace job?

Tell us the AMS or ASTM specification and the bar sizes. We confirm availability and certification for each enquiry before quoting, and every bar is marked with its heat number.

Will titanium come with a 3.1 certificate?

Yes. Every supply comes with the mill's original EN 10204 3.1 test certificate, and heat numbers are marked on each piece. Call +91 22 6636 2372 or WhatsApp +91 99872 73700 to discuss your use.