Inconel 625 Round Bar in Chennai for Shafts and Machined Parts

Inconel 625 Round Bar in Chennai for Shafts and Machined Parts

Inconel 625 round bar for shafts and machined parts in Chennai's Guindy and Ambattur shops. Alloy 625 is a niobium-strengthened nickel-chromium-molybdenum alloy that keeps its strength and resists pitting and crevice corrosion in seawater and many acids, so machine shops choose it for pump shafts, sleeves, rings and housings. Ganesh Metals has been a high-nickel alloy stockist, supplier and processor in Mumbai since 1992 and cuts 625 bar to length on request.

We provide direct door delivery to your company in Chennai. 625 bar is cut and packed at our Mumbai shop and supplied from our Mumbai stock to Guindy, Ambattur, Thirumudivakkam, Vanagaram or Red Hills. Send the diameter, length, quantity and whether the part will be turned and welded, and we will confirm the condition before quoting.

Inconel 625 round bar specifications

Inconel 625 (UNS N06625, W.Nr 2.4856): round bar to ASTM B446 / ASME SB446, Grade 1 (annealed) or Grade 2 (solution annealed). The condition is stated on the mill certificate.

The same grade is also supplied as plate, sheet and coil, seamless and welded pipe and tube, and flanges. Bar is cut to your length list, and short pieces are available for tooling and repair jobs.

Pipe, tube and flanges: sizes confirmed per enquiry, from Mumbai stock.

How 625 bar differs from 718 bar: 625 is chosen for corrosion resistance and weldability with good strength; Inconel 718 is age-hardened for higher strength and is chosen where load, not corrosion, drives the part. Send the duty and we will say which one fits.

Typical chemistry: Ni 58% min, Cr 20.0–23.0%, Mo 8.0–10.0%, Nb 3.15–4.15%, Fe 5.0% max, C 0.10% max. Density about 8.44 g/cm³.

Minimum properties, B446 bar: Grade 1 annealed, tensile 827 MPa, yield 414 MPa, elongation 30%; Grade 2 solution annealed, tensile 690 MPa, yield 276 MPa, elongation 30%.

Equivalents: W.Nr 2.4856, EN NiCr22Mo9Nb. The UNS number N06625 and the B446 grade on the mill certificate are what your inspector should check.

Related pages: Inconel 625 grade data · Inconel round bar · Inconel sheet & plate · Inconel in Chennai · Inconel 718 · Inconel 625 plate in Chennai · Inconel 625 discs in Chennai

625 round bar: how it is supplied

Machine shops usually need bar in the right diameter and a defined length rather than a full mill length. We cut Inconel 625 bar to your list and each cut piece keeps the parent-bar heat number for the inspection file. Where the part starts as a blank rather than a bar, ask about our 625 discs and circles. Work out weights with the metal weight calculator.

How to order 625 round bar for Chennai

1. Call +91 22 6636 2372, WhatsApp +91 99872 73700 or email sales@ganeshmetals.com with the grade (625 / UNS N06625), B446 grade or condition, diameter, cut length, quantity and the part you are making. You can also use our enquiry form.

2. We confirm stock and send price, availability and the MTC heat number.

3. You confirm the order and the transporter. We cut, mark, pack, dispatch and share the documents.

Where 625 round bar is used around Chennai

Guindy Industrial Estate: 625 bar for pump and valve shafts, sleeves and bushings machined for corrosive process duty.

Ambattur Industrial Estate: bar for turned and milled components made by contract machine shops for exchanger and process-equipment builders.

Thirumudivakkam and Vanagaram: smaller job shops that need a few cut lengths of 625 for repairs, spares and prototypes.

Red Hills and Puzhal: maintenance machining of seawater-wetted and chemical-plant parts where carbon and low-alloy steels corrode.

Sriperumbudur and Oragadam corridors: shops machining high-strength corrosion-resistant parts from 625 bar to the drawing.

Why Guindy and Ambattur shops order 625 bar from Ganesh Metals

High-nickel alloy stockist, supplier and processor in Mumbai since 1992.

The mill's original EN 10204 3.1 test certificate is passed on with every supply, with heat-number traceability.

ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certified.

Bar is cut to the length you list, so a shop does not pay for a full mill length it cannot use.

The heat number stays on every cut piece, which keeps traceability when the part is machined.

If a part needs plate or a disc blank rather than bar, we will point you to the cheaper form before you order.

FAQs — Chennai

Do you supply Inconel 625 round bar to Guindy and Ambattur?

Yes. We send 625 round bar to Guindy, Ambattur, Thirumudivakkam, Vanagaram and Red Hills, supplied from our Mumbai stock. We provide direct door delivery to your company in Chennai.

How long does delivery to Chennai take?

That depends on the transporter and route. We confirm the dispatch plan with you when the order is placed.

Inconel 625 or 718 bar for a machined shaft?

625 suits corrosive duty where good strength and weldability matter; 718 is the higher-strength, age-hardened choice. Send the load, medium and temperature and we will help you compare. See Inconel 718 round bar in Chennai and Inconel 625 plate in Chennai.

Can you cut Inconel 625 bar to length?

Yes. Send the diameter and the cutting list. We cut bar to length and mark the heat number on each piece so the inspector can trace the parent bar.

Will 625 bar come with a 3.1 certificate for inspection?

Yes. Every supply comes with the mill's original EN 10204 3.1 test certificate, and heat numbers are marked on each piece. Call +91 22 6636 2372 or WhatsApp +91 99872 73700 to discuss your use.