Inconel Round Bars & Rods – 600, 625, 718, X-750 & Incoloy 825

Inconel Round Bar (600, 625, 718, X-750, 825) – Stockist, Supplier and Processor in Mumbai Since 1992

Inconel round bar is the starting point for machined shafts, fasteners, valve parts and fittings that must survive heat and corrosion. Ganesh Metals, a stockist, supplier and processor in Mumbai since 1992, supplies Inconel 600 and 601 bar to ASTM B166, Inconel 625 bar to ASTM B446, age-hardenable Inconel 718 and X-750 bar to ASTM B637, Incoloy 800/800H to ASTM B408 and Incoloy 825 to ASTM B425, with the matching ASME SB specifications. Bars can be supplied in random or cut lengths and in annealed or aged condition where relevant, each with an EN 10204 3.1 MTC and heat-number traceability.

For bar, the important details are diameter, tolerance class, length, heat-treat condition and the end use. Machined parts often need bars slightly oversize, while fastener stock may need a tighter tolerance. Tell us the specification and condition on your drawing, and we will confirm availability and quote bars cut to the lengths you need.

Why Choose Inconel Bar?

Inconel bar machines more slowly than stainless steel, so starting with the correct grade, condition and diameter saves real time on the shop floor. Solid-solution 600, 625 and 825 bars are used annealed; 718 and X-750 are aged for strength after rough machining.

Applications:

Inconel round bars are machined into parts that must stay strong and corrosion-free in heat, acids or seawater.

Oil & Gas: 718 and 625 bar for valve stems, hangers, wellhead parts and high-strength fasteners.
Marine: 625 bar for seawater-wetted shafts, fasteners and pump components on ships and offshore units.
Chemical Processing: 625, 825 and 600 bar for agitator shafts, pump parts and valve trims in acids.
Aerospace: 718 and X-750 bar for engine shafts, bolts, rings and springs in hot sections.
Heat Exchangers: Tie rods, studs and fasteners machined from 600 and 625 bar for hot exchanger service.

Inconel and Incoloy bars are supplied as round bars and rods, other bar shapes on request, forgings, rings and bars cut to length. Sizes on request – send diameter, length, condition and quantity.

Inconel Bar: Specs, Sizes & Equivalents

Bars cut from longer lengths are stamped or tagged with the original heat number, and PMI confirms the grade before dispatch so that 625 and 825 bars, which look identical, cannot be mixed up. The cutting record links each piece to the MTC and to your purchase order.

Inconel Bar: ASTM / ASME Specifications by Form

Inconel 600 / 601: ASTM B166 / ASME SB166
Inconel 625: ASTM B446 / ASME SB446. Inconel 718 and X-750: ASTM B637 / ASME SB637; other specs on request.
Incoloy 800/800H: ASTM B408. Incoloy 825: ASTM B425 / ASME SB425. Forgings to ASTM B564 where specified.

Typical Inconel Bar Chemistry & Properties

Typical Nb: 625 ~3.6%, 718 ~5.1%
Typical: 718 and X-750 are age-hardenable with Ti and Al; 600, 625 and 825 are used in the annealed condition.
Typical: aged 718 offers far higher yield strength than annealed 625, which in turn exceeds 600.

FAQ: Can you cut Inconel round bar to length?

Yes, bars are cut to your lengths on request.
Q: Which spec covers Inconel 625 round bar? A: ASTM B446 / ASME SB446, supplied annealed with an EN 10204 3.1 MTC.
Q: Do you supply Inconel 718 bar in aged condition? A: Yes, annealed or annealed-and-aged, exactly as your order states.

Inconel Bar Equivalent Grades & FAQ

Equivalents: 2.4816 · 2.4856 · 2.4668 · 2.4669
Q: How do you stop grade mix-ups in bar? A: PMI checks the grade and every bar keeps its heat-number marking.
Enquire for Inconel Bar: call +91 99872 73700 or email sales@ganeshmetals.com with form, size and quantity.

Certified Inconel Bar Supply

Every Inconel Bar order from Ganesh Metals ships with full documentation:

ISO 9001/14001/45001
MTC to EN 10204 3.1 with heat-number traceability
ASTM B166 / B446 / B637 / B425

Inconel Bar Forms We Supply

Round Bars
Bright Bar Rods
Other Bar Shapes
Billets
Forgings & Rings
Bars Cut to Length

Why Ganesh Metals?

Stockist, supplier and processor in Mumbai since 1992
PMI-verified Inconel Bar with original mill markings
Sizes on request – send Inconel Bar form, size & quantity for a quote

GANESH METALS

NICKEL ALLOYS
➤ Inconel 600
➤ Inconel 601
➤ Inconel 625
➤ Inconel 690
➤ Inconel 718
➤ Inconel X-750
➤ Hastelloy C22
➤ Hastelloy C276
➤ Hastelloy B2
➤ Hastelloy B3
➤ Hastelloy C4

OTHER GRADES
➤ Monel 400
➤ Monel K500
➤ Monel R405
➤ Incoloy 800
➤ Incoloy 800H / 800HT
➤ Incoloy 825
➤ Incoloy 925
➤ Alloy 20
➤ Nickel 200 / 201
➤ Nimonic 80

GET IN TOUCH
Mahendra Prajapati
📍 Shop Number 12, Sant Sena Maharaj Marg,
2nd Kumbharwada, Mumbai – 400004
📞 +91 99872 73700
📧 sales@ganeshmetals.com
📧 ganeshmetal2372@gmail.com