Incoloy Supplier for Vadodara (Baroda): 825, 800/800H/800HT and 925 from Mumbai Stock

Incoloy Supplier for Vadodara (Baroda): 825, 800/800H/800HT and 925 from Mumbai Stock

Ganesh Metals supplies Incoloy 825, Incoloy 800, 800H and 800HT, and Incoloy 925 to plants and fabricators in Vadodara. Incoloy 825 comes as plate, sheet, strip, bar and pipe; the 800 family as plate, sheet, bar and pipe for hot service; and 925 as round bar and forgings. We have been a high-nickel alloy stockist in Mumbai since 1992, and every lot carries the mill's EN 10204 3.1 certificate.

We provide direct door delivery to your company in Vadodara. Material is cut and packed at our Mumbai shop and delivered to your plant after we agree the dispatch plan with you. We deliver across Makarpura GIDC, Nandesari GIDC, Ranoli and the Koyali refinery area, Padra, Por, Manjusar, Savli GIDC, Waghodia and Halol. Tell us whether your problem is acid corrosion or high temperature and we will point you to 825 or the 800 family.

Incoloy grades and specifications

Incoloy 825 (UNS N08825, W.Nr 2.4858): plate, sheet and strip ASTM B424 / ASME SB424, bar ASTM B425, seamless pipe and tube ASTM B423, welded pipe B705 and welded tube B704, fittings ASTM B366 (WPNICMC).

Incoloy 800 / 800H / 800HT (UNS N08800 / N08810 / N08811): plate and sheet ASTM B409, bar ASTM B408, seamless pipe and tube ASTM B407, welded pipe B514, welded tube B515. 800H/800HT dual certification is common; we confirm it per order.

Incoloy 925 (UNS N09925): round bar, forgings and seamless tube to ASTM B805 and ASTM B983, for NACE MR0175 / ISO 15156 service where the buyer specifies it.

Forgings and flanges for all three families: ASTM B564 / ASME SB564.

Incoloy 825 typical chemistry: Ni 38–46%, Cr 19.5–23.5%, Mo 2.5–3.5%, Cu 1.5–3.0%, Ti 0.6–1.2%, iron 22% min. Density about 8.14 g/cm³. Annealed minimums (ASTM B424): tensile 586 MPa, yield 241 MPa, elongation 30%.

Incoloy 800 family chemistry: Ni 30–35%, Cr 19–23%, Fe 39.5% min. 800H keeps carbon at 0.05–0.10% with a coarse grain for creep strength, and 800HT holds Al+Ti at 0.85–1.20% for service above about 700 °C. Density about 7.94 g/cm³.

Incoloy 925 chemistry: Ni 42–46%, Cr 19.5–22.5%, Mo 2.5–3.5%, Cu 1.5–3.0%, Ti 1.9–2.4%. It is age-hardened for much higher strength than 825 with similar corrosion resistance.

Full grade details: Incoloy 825 · Incoloy 800/800H/800HT · Incoloy 925 · All nickel alloys · Inconel in Vadodara · Hastelloy in Vadodara · Monel in Vadodara · Nickel alloys in Ankleshwar–Bharuch

Incoloy forms we supply

Incoloy 825 plate and sheet are our main line, cut to size or punched into circles for nozzles, pads and blanks, with the heat number kept on every piece. We also supply 825 strip, round bar, seamless and welded pipe and tube, flanges and fittings, 800H/800HT plate, bar and pipe, and 925 bar cut to length. Sizes are on request. Estimate weights with our metal weight calculator.

How to order Incoloy from Vadodara

1. WhatsApp +91 99872 73700 or email sales@ganeshmetals.com with the grade (825, 800, 800H, 800HT or 925), form, size, quantity and any NACE or 800H grain-size requirement.

2. We confirm stock and send price, availability and the MTC heat number. Quoted stock is held for 2 days.

3. You confirm the order and the transporter. We cut, mark, pack, dispatch and share the documents.

Or use our enquiry form. For weekly nickel price news, read our Metal Bulletin.

Where Incoloy is used in Vadodara

Fertiliser and phosphoric-acid plants around Vadodara: Incoloy 825 for sulphuric and phosphoric acid lines, evaporator parts and agitators.

Refinery and petrochemical units near Koyali: Incoloy 800H/800HT for heater parts, reformer pigtails and hot gas piping, and 825 where chloride stress cracking is a concern.

Process-equipment fabricators in Makarpura GIDC, Por and Manjusar: 825 plate for vessels and heat exchangers that have outgrown 316L.

Heat-treatment and furnace builders around Waghodia and Halol: Incoloy 800H/800HT for retorts, muffles, radiant tubes and fixtures.

Oilfield and valve component makers: Incoloy 925 bar for high-strength parts in sour (H2S) service.

Why Vadodara buyers choose Ganesh Metals for Incoloy

High-nickel alloy stockist, supplier and processor in Mumbai since 1992.

The mill's original EN 10204 3.1 test certificate is passed on with every supply, with heat-number traceability.

ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certified.

PMI before dispatch, so 825, 800H and 925 are never mixed up on your shop floor.

For 800H/800HT, the carbon, Al+Ti and grain size on the MTC are checked against your order before dispatch.

Pan-India supply, including units in SEZs.

FAQs — Vadodara

Do you supply Incoloy to Vadodara?

Yes. We supply Incoloy 825 plate, sheet, bar and pipe, Incoloy 800/800H/800HT and Incoloy 925 bar to Vadodara from our Mumbai stock. We provide direct door delivery to your company in Vadodara.

How long does delivery to Vadodara take?

That depends on the transporter and route. We confirm the dispatch plan with you when the order is placed.

Incoloy 825 or Incoloy 800H: which do I need?

They solve different problems. Incoloy 825 is for wet corrosion, such as sulphuric and phosphoric acid and chloride stress cracking. Incoloy 800H and 800HT are for high-temperature strength and resistance to oxidation and carburisation, usually above about 600 °C.

When should I move from Incoloy 825 to Hastelloy?

If the acid is hotter, more concentrated or carries chlorides that pit 825, Hastelloy C276 or C22 is usually the next step. Send your process conditions and we will help you compare.

Will Incoloy come with a 3.1 certificate for inspection?

Yes. Every supply comes with the mill's original EN 10204 3.1 test certificate, and heat numbers are marked on each piece. Call or WhatsApp +91 99872 73700 to discuss your use.