Incoloy Supplier for Pune: 800/800H/800HT, 825 and 925 for Furnace, Heater and Process Equipment Makers

Incoloy Supplier for Pune: 800/800H/800HT, 825 and 925 for Furnace, Heater and Process Equipment Makers

Ganesh Metals supplies Incoloy 800, 800H and 800HT, Incoloy 825 and Incoloy 925 to furnace and heater builders, process-equipment fabricators and component makers in Pune. The 800 family comes as plate, sheet, bar, pipe and tube; 825 as plate, sheet, strip, bar and pipe; and 925 as round bar. We have been a high-nickel alloy stockist in Mumbai since 1992, and every lot carries the mill's EN 10204 3.1 certificate.

We provide direct door delivery to your company in Pune. Material is cut and packed at our Mumbai shop and delivered to your works after we agree the dispatch plan with you. We deliver across Bhosari and Pimpri-Chinchwad MIDC, Chakan, Talegaon, Ranjangaon, Kurkumbh, Shirwal, Hadapsar, Sanaswadi and Urse. Tell us your operating temperature or process media and we will point you to the 800 family or 825.

Incoloy grades and specifications

Incoloy 800 / 800H / 800HT (UNS N08800 / N08810 / N08811): plate and sheet ASTM B409, bar ASTM B408, seamless pipe and tube ASTM B407, welded pipe B514, welded tube B515. 800H/800HT dual certification is common; we confirm it per order.

Incoloy 825 (UNS N08825, W.Nr 2.4858): plate, sheet and strip ASTM B424 / ASME SB424, bar ASTM B425, seamless pipe and tube ASTM B423, welded pipe B705 and welded tube B704, fittings ASTM B366 (WPNICMC).

Incoloy 925 (UNS N09925): round bar and forgings to ASTM B805, for NACE MR0175 / ISO 15156 service where the buyer specifies it.

Forgings and flanges for all three families: ASTM B564 / ASME SB564.

Incoloy 800 family chemistry: Ni 30–35%, Cr 19–23%, Fe 39.5% min, Al 0.15–0.60%, Ti 0.15–0.60%. 800H keeps carbon at 0.05–0.10% with ASTM grain size 5 or coarser, and 800HT holds Al+Ti at 0.85–1.20%. Density about 7.94 g/cm³, melting range about 1357–1385 °C.

Incoloy 800H/800HT annealed minimums (ASTM B409 plate): tensile 448 MPa, yield 172 MPa, elongation 30%. The coarse grain and controlled carbon give much higher creep-rupture strength than Incoloy 800 above about 600 °C.

Incoloy 825 typical chemistry: Ni 38–46%, Cr 19.5–23.5%, Mo 2.5–3.5%, Cu 1.5–3.0%, Ti 0.6–1.2%. Density about 8.14 g/cm³. Annealed minimums (ASTM B424): tensile 586 MPa, yield 241 MPa, elongation 30%.

Full grade details: Incoloy 800/800H/800HT · Incoloy 825 · Incoloy 925 · Inconel 601 · Inconel in Pune · Hastelloy in Pune · Monel in Pune

Incoloy forms we supply

Incoloy 800H/800HT plate and sheet are cut to size for muffles, retorts, baskets and trays, and tube and pipe are cut to length for radiant tubes and heater coils. Incoloy 825 plate, sheet and tube go into vessels, exchangers and pickling equipment, and 925 bar is cut to length for machining. Every piece keeps its heat number. Sizes are on request. Estimate weights with our metal weight calculator.

How to order Incoloy from Pune

1. WhatsApp +91 99872 73700 or email sales@ganeshmetals.com with the grade (800, 800H, 800HT, 825 or 925), form, size, quantity and your maximum operating temperature.

2. We confirm stock and send price, availability and the MTC heat number. Quoted stock is held for 2 days.

3. You confirm the order and the transporter. We cut, mark, pack, dispatch and share the documents.

Or use our enquiry form. For weekly nickel price news, read our Metal Bulletin.

Where Incoloy is used in Pune

Heat-treatment furnace builders and captive heat-treat shops in Bhosari, Chakan and Talegaon: Incoloy 800H/800HT for retorts, muffles, radiant tubes, fans and fixtures.

Tubular heater and heating-element makers in Pimpri-Chinchwad and Hadapsar: Incoloy 800 and 825 sheath tube and strip for air, water and oil heaters.

Chemical and pharma plants in Kurkumbh and Ranjangaon: Incoloy 825 for sulphuric and phosphoric acid lines, pickling tanks and heat exchangers.

Process-equipment and heat-exchanger fabricators in Chakan and Shirwal: Incoloy 825 plate and tube where 316L cracks in chloride service.

Oil and gas equipment makers around Talegaon and Urse: Incoloy 925 and 825 bar for valve, wellhead and downhole parts in sour service.

Why Pune buyers choose Ganesh Metals for Incoloy

High-nickel alloy stockist, supplier and processor in Mumbai since 1992.

The mill's original EN 10204 3.1 test certificate is passed on with every supply, with heat-number traceability.

ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certified.

PMI before dispatch, so 800H, 825 and 925 are never mixed up on your shop floor.

For 800H/800HT, the carbon, Al+Ti and grain size on the MTC are checked against your order before dispatch.

Plate is cut to your fixture and tray sizes, so you buy less scrap.

FAQs — Pune

Do you supply Incoloy to Pune?

Yes. We supply Incoloy 800/800H/800HT, 825 and 925 plate, sheet, bar, pipe and tube to Pune from our Mumbai stock. We provide direct door delivery to your company in Pune.

How long does delivery to Pune take?

That depends on the transporter and route. We confirm the dispatch plan with you when the order is placed.

Incoloy 800H or Inconel 601 for furnace parts?

Incoloy 800H/800HT is a cost-effective choice for retorts, muffles and fixtures up to about 1000 °C. Inconel 601 has more nickel and aluminium, so it resists oxidation and scaling better in the hottest zones and under heavy thermal cycling. Tell us your temperature and atmosphere and we will help you compare.

Is Incoloy 800H suitable for carburising furnaces?

Yes, 800H/800HT is widely used in carburising and carbonitriding furnaces because its nickel and chromium slow carbon pick-up. For very severe carburising, a higher-nickel grade may last longer.

Will Incoloy come with a 3.1 certificate for inspection?

Yes. Every supply comes with the mill's original EN 10204 3.1 test certificate, and heat numbers are marked on each piece. Call or WhatsApp +91 99872 73700 to discuss your use.