Incoloy 800H and 800HT for High-Temperature Parts on Chennai Power Projects
Incoloy 800H and 800HT for High-Temperature Parts on Chennai Power Projects
Fabricators serving Ennore and North Chennai power projects specify Incoloy 800H or 800HT plate for heater casings, supports and fixtures that must hold shape under load. The grades keep useful creep strength in long, hot service. Furnace and heat-treatment hardware further south are covered on Incoloy 800H and 800HT in Chennai. Ganesh Metals, established in 1992, is a Mumbai stockist and supplier of high-nickel alloys.
We provide direct door delivery to your company in Chennai. Plate is cut in Mumbai and sent to fabricators in the Ennore and North Chennai generating belt. There is no Ganesh Metals branch in Chennai. Tell us the design temperature, atmosphere, and whether the drawing calls for 800H, 800HT or dual certification, and we will confirm the heat before we quote.
800H and 800HT for North Chennai power-project work
Identity and forms sit on the Incoloy 800 / 800H / 800HT grade page. 800H is UNS N08810 (W.Nr 1.4958); 800HT is UNS N08811 (W.Nr 1.4959). Plate and sheet follow ASTM B409. Pipe, tube and flanges: sizes confirmed per enquiry, from Mumbai stock.
800H versus 800HT table (typical limits): 800H carbon 0.05–0.10% with a controlled grain size; 800HT keeps that carbon band and a tighter aluminium-plus-titanium range of 0.85–1.20%. Dual certification is read from the mill test certificate for that heat, not assumed.
Typical chemistry, iron balance: Ni 30–35%, Cr 19–23%, C 0.05–0.10% (800H). Density about 7.94 g/cm³. ASTM B409 800H plate minimums: tensile 448 MPa, yield 172 MPa, elongation 30%. Grain size on the certificate matters as much as these figures.
Inconel 601 is often considered when oxide control or thermal cycling is more severe. Inconel 600 covers less demanding hot work. Inconel 690 is the high-chromium option some steam-side specifications call up. Send the temperature and medium and we will help you compare.
This is an industry page for power-project fabricators, not a claim that any named generating station buys from us. Usual supply is cut plate for heater panels and fixture plates.
Citywide 800-series coverage is on Incoloy 800H and 800HT in Chennai.
Acid-service plate on the same project is a different grade — see Incoloy 825.
Related pages: Incoloy 800/800H/800HT · Incoloy in Chennai · 800H and 800HT in Chennai · Inconel 601 · Inconel 600 · Inconel 690 · enquiry form
Plate and fixtures for power-heater fabrication
Most of this duty is plate and sheet, cut to a panel or fixture list, with the parent heat number marked on every piece. Circles for end covers can be punched or cut to drawing. Pipe and tube, when also specified, are confirmed per enquiry against Mumbai stock.
How to enquire for 800H or 800HT on a Chennai power job
1. Email sales@ganeshmetals.com, call +91 22 6636 2372 or WhatsApp +91 99872 73700 with the grade (800H, 800HT, or dual certification), form, thickness, cut sizes or drawing, quantity, temperature and atmosphere. The enquiry form is also fine.
2. We check Mumbai stock, then send the price with the mill-certificate heat number and the carbon, Al+Ti and grain-size values from the MTC.
3. After you accept the offer and name the transporter, we cut, mark, pack and dispatch, and the documents travel with the consignment.
Why power-project shops buy 800H and 800HT from Ganesh Metals
Mumbai stockist and supplier of high-nickel alloys since 1992.
The mill's original EN 10204 3.1 test certificate is supplied with the material, and heat numbers stay on the cut pieces.
The Mumbai shop holds ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018.
We read 800H, 800HT or dual certification against the actual heat, instead of assuming every plate carries both UNS numbers.
If 601 or 690 matches the specification more closely, we will say so before you buy 800HT by habit.
Door delivery into the Ennore and North Chennai belt
We provide direct door delivery to your company in Chennai. 800H and 800HT are supplied from Mumbai stock to fabricators in that generating belt.
Give the workshop address and your preferred transporter when you confirm. Transit is not a fixed number; it follows the agreed route and carrier.
A heater job that needs both plate and a short pipe list can be raised as one enquiry.
Use the 800H and 800HT Chennai page for furnace and heat-treatment work, not this power-project guide.
Family coverage sits on Incoloy in Chennai.
SEZ or bonded units on a power-project package can be supplied on the same Mumbai-stock basis.












Do you keep 800HT in Chennai for Ennore power-project work?
No. 800H and 800HT are supplied from Mumbai stock. We do not have a warehouse or office in Ennore or elsewhere in Chennai. We provide direct door delivery to your company in Chennai.
Can one order cover 800HT plate and a heater-tube length?
Yes. Send the plate cutting list and the pipe or tube sizes together. Pipe, tube and flanges: sizes confirmed per enquiry, from Mumbai stock.
When would you suggest Inconel 690 instead of 800HT?
When the specification calls for the higher-chromium 690 grade, or when you want a comparison at a stated temperature and medium. See Inconel 690. Email sales@ganeshmetals.com to ask before you buy.
Will the certificate show grain size and an EN 10204 3.1 statement?
The mill's original EN 10204 3.1 test certificate travels with the supply. For 800H and 800HT we also read carbon, aluminium-plus-titanium and grain size against your order.
Should a power-heater fixture be ordered as 800H or as 800HT?
Follow the drawing. 800HT is the tighter Al+Ti variant; 800H is defined by carbon and grain size. If dual certification is allowed, we check the heat against both UNS numbers before quoting.
GANESH METALS
NICKEL ALLOYS
➤ Inconel 600
➤ Inconel 601
➤ Inconel 625
➤ Inconel 690
➤ Inconel 718
➤ Inconel X-750
➤ Hastelloy C22
➤ Hastelloy C276
➤ Hastelloy B2
➤ Hastelloy B3
➤ Hastelloy C-4
OTHER GRADES
➤ Monel 400
➤ Monel K500
➤ Monel R405
➤ Incoloy 800
➤ Incoloy 800H / 800HT
➤ Incoloy 825
➤ Incoloy 925
➤ Alloy 20
➤ Nickel 200 / 201
➤ Nimonic 80A
GET IN TOUCH
Mahendra Prajapati
📍 Shop Number 12, Sant Sena Maharaj Marg,
2nd Kumbharwada, Mumbai – 400004
📞 +91 99872 73700
📧 sales@ganeshmetals.com
📧 ganeshmetal2372@gmail.com
© 2026 Ganesh Metals. All Rights Reserved.